TM 9-2350-222-20-1-4
GREASE ACTUATED TRACK ADJUSTING LINK REPAIR (Sheet 1 of 4)
PROCEDURE INDEX
PAGE
PROCEDURE
I
Disassembly
Inspection
Assembly
TOOLS:
7/16 in. socket with 1/2 in. drive
3/4 in. socket with 1/2 in. drive
15/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-236 N.m)
10 in. adjustable wrench
SPECIAL TOOLS:
Bearing driver (Item 29.1, Chapter 3, Section I)
SUPPLIES:
Grease (Item 36, Appendix D)
Brush (Item 10, Appendix D)
Rag, wiping (Item 65, Appendix D)
Dry cleaning solvent (Item 54, Appendix D)
Packing (NAS1523C-10B)
Lockwasher (MS35338-44) (2 required)
Goggles (Item 74, Appendix D)
Rubber gloves (Item 73, Appendix D)
REFERENCES: None
Remove grease actuated track adjusting link from vehicle
PRELIMINARY PROCEDURE:
NOTE
Repair procedure is the same for both right end left side adjusting
links.
Go on to Sheet 2
TA249139
14-62.9
Change 3
