TM 9-2350-222-20-1-4
P A R K I N G BRAKE CONTROL ASSEMBLY AND LINKAGE REPLACEMENT
(DRIVER'S STATION) (Sheet 1 of 10)
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Cleaning and Inspection
Installation
TOOLS 7/16 in. combination box and open end wrench
1/2 in. combination box and open end wrench
9/16 in. combination box and open end wrench
3/4 in. combination box and open end wrench
7/8 in. combination box and open end wrench
15/ 16 in. combination box and open end wrench
8 in. adjustable wrench
1/2 in. socket with 1/2 in. drive
9/16 in. socket with 1/2 in. drive
5 in. extension with 1/2 in. drive
Ratchet with 1/2 in. drive
7/8 in. crowfoot wrench with 3/8 in. drive
1/8 in. punch
1-1/4 lb hammer
Slip joint pliers
Torque wrench with 3/8 in. drive (0-200 lb-in) (0-22 N.m)
Flat-tip screwdriver
SUPPLIES: Cotter pin (MS24665-283)
Cotter pin (MS24665-281)
Spring pin (MS39086-47)
Spring pin (MS39086-157)
Preformed packing (MS28775-110)
Lockwasher (MS35335-39)
Dry cleaning solvent
(4 required)
Lockwasher (186491)
(Item 54, Appendix D)
Black grease pencil
Lockwasher (MS35338-46)
Sealing compound
(2 required)
(Item 23, Appendix D)
Safety wire (Item 61, Appendix D)
Bushing - brake control nut (10915816)
PERSONNEL: Two
PRELIMINARY PROCEDURES:
Remove powerplant (page 5-1)
Remove right bulkhead access cover (page 16-33)
Go on to Sheet 2
13-105
