TM 9-2350-222-20-1-4
PARKING BRAKE BELLCRANK REPAIR AND REPLACEMENT Sheet 3 of 4)
CLEANING AND INSPECTION:
1.
Inspect bellcrank for cracks, damage, and wear.
2.
Clean bellcrank and bushing cavity with dry
cleaning solvent (Item 54, Appendix D).
INSTALLATION:
1.
Place new bushing (A) in position in bellcrank
(B).
2.
Using vise (C), press bushing (A) into bellcrank
(B).
3.
Place flat washer (D) and bellcrank (B) in
position on mounting bracket (E).
Place two flat washers (F) and nut (G) in
4.
position on bellcrank (B).
5.
Using 9/16 inch wrench, tighten nut (G).
6.
Aline slot of nut (G) with hole of mounting bracket stud (H).
Using needle nose pliers, install new cotter pin (J).
7.
Go on to Sheet 4
TA140407
13-101