TM
9-2350-222-20-1-4
PARKING BRAKE BELLCRANK REPAIR AND REPLACEMENT (Sheet 2 of 4)
Using pliers, remove cotter pin (G) securing
4.
clevis (H) to bellcrank (F). Throw cotter pin
away.
Remove flat washer (J) and pin (K) from clevis
5.
(H).
Using pliers, remove cotter pin (L) securing
6.
clevis (M) to bellcrank (F). Throw cotter pin
away.
Remove flat washer (N) and pin (P) from clevis
7.
(M).
Using pliers, remove cotter pin (Q). Throw
8.
cotter pin away.
Using 9/16 inch wrench, remove nut (R) and
9.
two flat washers (S).
Displace clevises (H) and (M).
10.
Remove bellcrank (F) and flat washer (T)
11.
from brake control bracket (U).
12. Place bellcrank (F) in bench vise (V).
13. Using driftpin and hammer, drive out bushing
(W) from bellcrank (F). Throw bushing away.
Go on to Sheet 3
TA140406
13-100
