TMi 9-2350-222-20-1-4
SHIFTING CONTROL BRACKET AND CONNECTING LINK ASSEMBLY REPAIR AND
REPLACEMENT (Sheet 1 of 9)
PROCEDURE INDEX
PAGE
PROCEDURE
I
Removal
Disassembly
Assembly
Installation
5 in. extension with 1/2 in. drive
7/16 in. socket with 1/2 in. drive
TOOLS:
Torque wrench with 1/2 in. drive
9/16 in. socket with 1/2 in. drive
(0-175 lb-ft) (0-237 N.m)
Ratchet with 1/2 in. drive
3/4 in. pin punch
1/8 in. pin punch
6 in. rule
1/2 in. pin punch
Grease gun
9/16 in. combination box and
Vise
open end wrench (2 required)
Hammer
3/4 in. combination box and
5/16 in. combination box and
open end wrench
open end wrench
7/16 in. combination box and
open end wrench
9/16 in. crowfoot wrench with 3/8 in. drive
Adapter, 1/2 in. to 3/8 in.
Imckwasher (9 required)
Steel welding rod 1/8 in. dia.
SUPPLIES:
Lockwasher (3 required)
Gasket
Rags (Item 65, Appendix D)
Grease (Item 36, Appendix D)
Remove powerplant (page 5-1)
PRELIMINARY PROCEDURE:
Go on to Sheet 2
Change 5
11-52
