TM 9-2350-222-20-14
SHIFTING CONTROL BRACKET AND CONNECTING LINK ASSEMBLY REPAIR AND
REPLACEMENT
(Sheet 2 of 9)
REMOVAL:
1.
Lift shaft assembly from link assembly.
2.
Using 7/16 inch socket, remove four screws (A) and lockwashers (B) securing spacer (C) and gasket
3.
Remove spacer (C) and gasket (D). Throw gasket (D) away.
4.
Using 7/16 inch socket, remove screw (E) from clamp (F).
5.
Remove clamp (F).
6.
Push cable (G) aside.
Go on to Sheet 3
TA139306
11-53