TM 9-2350-222-20-1-4
SHIFTING CONTROL BRACKET AND CONNECTING LINK ASSEMBLY REPAIR AND
REPLACEMENT (Sheet 4 of 9)
10.
Using 9/16 inch wrench, remove bolt (N).
11.
Using 9/16 inch socket, extension, and 9/16
inch wrench, remove three screws (P) and
12.
Remove bracket assembly (R) and shield (S)
from hull wall.
DISASSEMBLY:
1.
Using 9/16 inch socket, remove bolts (A) and
(B).
2.
Remove stud and rod end bearing assembly (C)
from clevises (D) and (E).
3.
Inspect rod end bearings (F). Replace if
required.
4.
Inspect stud (G) for cracks or bends. Replace if
required.
NOTE
If replacement of parts on stud
and rod end bearing assembly (C)
is required, perform steps 5 thru 7.
GO on to Sheet 5
11-55