TM 9-2350-222-20-1-4
SHIFT LINKAGE ADJUSTMENT (Sheet 8 of 20)
43. Go to right rear of vehicle and try to insert
locating pin into alinement hole (C) and
through clevis (AB). If locating pin can be
inserted, shift linkage is in adjustment.
Remove locating pin and go to step 129. If
locating pin cannot be inserted, go on to step
44.
44. Displace ammo rack (page 17-7).
45. Try to insert locating pin into alinement hole
(AC). If locating pin can be inserted, remove
locating pin and go to step 73, If locating pin
cannot be inserted, go on to step 46.
46. Using 9/16 inch wrench, loosen jamnuts (AD)
and (AE).
47. Using 9/16 inch wrench, remove screw (AF)
and remove shifting rod bearing end (AG)
from clevis (AH).
48. Manually move clevis (AH) and insert
locating pin into alinement hole (AC).
GO on to Sheet 9
TA139262
11-9
