TM9-2350-222-20-1-3
ACCELERATOR CONNECTING LINK REPLACEMENT (Sheet 1 of 1)
TOOLS: Slip joint pliers
SUPPLIES: Cotter pin (MS24665-281) (2 required)
REMOVAL:
1.
Using pliers, remove two cotter pins (A). Throw cotter pins (A) away.
2.
Remove two pins (B) from connecting link (C).
3.
Remove connecting link (C).
INSTALLATION:
1.
Install two pins (B) through holes in connecting link (C) and holes in two lever rods (D).
Using pliers, install two new cotter pins (A) in holes in two pins (B).
2.
End of Task
TA149120
7-450