TM9-2350-222-20-1-3
ACCELERATOR PEDAL ASSEMBLY REPLACEMENT (Sheet 1 of 4)
PROCEDURE INDEX
PROCEDURE
Removal
Cleaning and Inspection
Installation
TOOLS: 7/16 in, socket with 1/2 in. drive
9/16 in. combination box and open end wrench
(2 required)
Slip joint pliers
3 in. extension with 1/2in. drive
Retaining ring pliers (outside)
SUPPLIES: Dry cleaning solvent (Item 54, Appendix D)
Cotter pin (MS24665-281)
Lockwasher (MS35338-44) (6 required)
Rags (Item 65, Appendix D)
REMOVAL:
1.
Using pliers, remove cotter pin (A) from pin (B).
Throw cotter pin away,
2.
Pull pin (B) out of connecting link (C) and out
of lever rod (D).
3.
Using socket, remove four screws (E) and
pedal assembly (H) from vehicle.
Go on to Sheet 2
7-446