TM9-2350-222-20-1-3
ACCELERATOR PEDAL ASSEMBLY REPLACEMENT (Sheet 2 of 4)
4.
Using retaining ring pliers, remove retaining ring (J) from lever rod (D).
5.
Remove bearing (K).
6.
Using socket, remove two screws (L) and lockwashers (M) from pedal (H). Throw lockwashers
away.
7.
Pull lever rod (D) out of holes in pedal (H).
8.
Remove two woodruff keys (N) from lever rod (D).
9.
Remove bearing unit (P) from lever rod (D).
10.
Using wrench, loosen jamnut (Q) while holding pedal travel stop (R) with wrench.
11.
Unscrew pedal travel stop (R) and jamnut (Q) from pedal (H).
12.
Remove jamnut (Q) from pedal travel stop (R).
Go on to Sheet 3
TA141467
7-447
