TM9-2350-222-20-1-3
POWERPLANT RIGHT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT
(2D ENGINE) (Sheet 1 of 9)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
Installation
TOOLS: Ratchet with 1/2 in. drive
1/2 in. combination box and
Hinged handle with 1/2 in. drive
open end wrench
6 in. extension with 1/2 in. drive
7/16 in. combination box and
1/2 in. socket with 1/2 in, drive
open end wrench
9/16 in. socket with 1/2 in. drive
9/16 in. combination box and
Alining punch
open end wrench
3/4 in. combination box and
11/16 in. socket with 1/2 in. drive
open end wrench
SUPPLIES: Self-locking nut (8 required)
Self-locking nut (6 required)
PERSONNEL: Two
PRELIMINARY PROCEDURES: Remove powerplant (page 5-25)
Remove engine shroud (page 9-2)
Remove engine right oil cooler (page 6-130)
Remove transmission right oil cooler (page 6-146)
Remove engine cooling fan shroud (page 9-52)
Remove engine cooling fans (page 9-48)
Remove centrifugal fan housings (page 9-59)
Remove engine access covers (right bank) (page 6-81)
Go on to Sheet 2
All data on pages6-95 thru 6-99 deleted.
(6-99 blank)/6-100 Change 4
