TM9-2350-222-20-1-3
POWERPLANT RIGHT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT
(2D ENGINE) (Sheet 2 of 9)
NOTE
B e c a u s e of space limitations, it may be necessary to
interchange like-size sockets with wrenches to get at a
particular screw.
REMOVAL:
1.
Using 1/2 inch socket and extension, remove
two assembled washer bolts and cushioned
clamps (A).
2.
Using 1/2 inch socket and extension, remove
washer bolt (B).
3.
While supporting ignition unit (C), and using
1/2 inch wrench, remove two capscrews (D).
4.
Remove ignition unit (C) with clamps and leads
from frame.
5.
Using 1/2 inch socket, remove two capscrews
(E) and self-locking nuts from bracket. Use 1/2
inch wrench to keep nuts from turning. Throw
self-locking nuts away.
6.
Using 9/16 inch socket, remove screw with
cushioned clamp (F) holding cable assembly.
Use 9/16 inch wrench to keep nut from
turning.
Go on to Sheet 3
TA139469
6-101