TM 9-2350-222-20-1-3
ENGINE COOLING FAN SHROUD REPLACEMENT (Sheet 2 of 8)
REMOVAL:
1.
Using 1/2 inch socket, remove ten bolts (A) securing two cover plates (B).
2.
Remove two cover plates (B).
3.
Using 9/16 inch socket, remove eight bolts and lockwashers (C) securing fan guards to shroud (D).
Remove fan guards (E) from shroud (D).
4.
5.
Using 1/2 inch socket, remove two bolts (F).
NOTE
To gain access to bolts (G) and nuts (H), reach through holes in
shroud rails.
6.
Using 1/2 inch socket, remove two bolts (G).
7.
Using 1/2 inch socket, remove 12 nuts (H).
TA140286
Go on to Sheet 3
9-52