TM 9-2350-222-20-1-3
CENTRIFUGAL FAN HOUSING REPLACEMENT (Sheet 1 of 3)
TOOLS:
1/2 in. socket with 1/2 in. drive
9/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Feeler gage
9/16 in. combination box and open end wrench (2 required)
SUPPLIES: Lockwasher (MS35338-46) (8 required)
Self-locking nuts (MS21044N6) (2 required)
PRELIMINARY PROCEDURES: Remove top deck (page 16-21)
Remove engine shroud (page 9-2)
CAUTION
Do
not
drop
screws or
Iockwashers into fan housing as
damage to fan could result.
REMOVAL:
1.
Using 9/16 inch socket, remove eight screws (A)
and lockwashers holding two fan housings (B) to
engine (front end and flywheel end). Throw
lockwashers away.
Go on to Sheet 2
TA140293
9-59
