TM9-2350-222-20-1-3
POWERPLANT RIGHT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT
(2D ENGINE) (Sheet 4 of 9)
NOTE
It may be necessary to depress three flanges (L) on frame
bottom during removal to clear protruding obstacles on the
engine.
NOTE
Five of the six cooler frame upper brackets are identical and
are mounted the same way. The sixth bracket (M) is located
closest to the engine flywheel end and requires three shims
and an additional screw with self-locking nut for proper
installation.
12. Using 9/16 inch socket with extension, remove
nut securing shims (M). Hold screw head below
shims with 9/16 inch wrench to keep screw
from turning.
Go on to Sheet 5
TA139471
6-103