TM 9-2350-222-20-1-3
POWERPLANT REPLACEMENT (2D ENGINE) (Sheet 1 of 23)
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Installation
TOOLS:
5 ton hoist or comparable lifting device capable of lifting powerplant 12 ft. high
Ratchet with 1/2 in. drive
2 in. extension with 1/2 in. drive
9/16 in. socket with 1/2 in. drive
Ratchet with 3/4 in. drive
1-1/2 in. socket with 3/4in. drive
Torque wrench with 3/4 in. drive (0-600 lb-ft) (0-813 N.m)
7/16 in. combination box and open end wrench
11/16 in. combination box and open end wrench
5/16 in. combination box and open end wrench
Adjustable wrench
Spanner wrench
Long round nose pliers
Flat-tip screwdriver
9/16 in. combination box and open end wrench
3/8 in. combination box and open end wrench
SPECIAL TOOLS: Engine and transmission sling (Item 31, Chapter 3, Section I)
Final drive guide shield (Fig F-1, Appendix F) (2 required)
FABRICATED TOOLS:
Final drive adapter hook-up tool (Fig F-4, Appendix F)
SUPPLIES:
Covers for fire extinguisher tubing fittings
Rubber gloves (Item 73, Appendix D)
Covers for primary fuel line fittings
Plastic caps
Goggles (Item 74, Appendix D)
Covers for hydraulic brake line fittings
Covers for fuel return line fittings
Rags (Item 65, Appendix D)
Dry cleaning solvent (Item 54,
Covers for air cleaner outlet hose connect points
Appendix D)
Covers for fire extinguisher elbows (3 required)
Grease (Item 36, Appendix D)
Small rope
Wooden blocks, 12 in. x 12 in. x 14 in. (3 required)
Masking tape (Item 57, Appendix D)
Lockwasher (10 required
Lockwasher (2 required)
Cotter pin
PERSONNEL: Three
REFERENCE:
TM 9-2350-222-10
Go on to Sheet 2
Change 4
5-25
