TM 9-2350-222-20-1-3
POWERPLANT REPLACEMENT (2D ENGINE) (Sheet 8.1 of 23)
WARNING
Dry cleaning solvent P-D-680 is toxic and flammable. To avoid injury, wear
protective goggles and gloves and use in a well-ventilated area. Avoid
contact with skin, eyes, and clothes, and do not breathe vapors. Do not use
near open fire or excessive heat. The flash point for Type i dry cleaning
solvent is 100F (38C), and for Type II is 140F (60C). If you become dizzy
while using dry cleaning solvent, get fresh air immediately and get medical
aid. if contact with eyes is made, wash your eyes with water and get medical
aid immediately.
28.1. Before disengaging quick-disconnect
coupling (AJ.1), place rags under coupling
and clean with dry cleaning solvent.
28.2. Disengage quick-disconnect coupling (AJ.1)
by pulling up and twisting collar of female
half until it snaps off locking nut of male
half.
28.3.
Using plastic caps, cover quick-disconnect
coupling halves.
Go on to Sheet 9
Change 4
5-32.1/(5-32.2 blank)
