TM 9-2350-222-20-1-3
POWERPLANT REPLACEMENT (2D ENGINE) (Sheet 6.1 of 23)
NOTE
Perform steps 16.1 through 16.7 on late model vehicles only.
16.1. Using pliers, remove cotter pin (Y) from
pin (Z) and remove pin (Z) that secures
(AB). Throw cotter pin away.
16.2 Using 9/16 inch wrench, remove two
16.3. Using light rope or heavy masking tape,
tie control cable (AD.1) out of way of
Go on to Sheet 6.2
TA253170
Change 1 5-30.1