MWO 9-2350-372-23-1
10. MODIFICATION PROCEDURES - Continued
g. Installation - Continued
NOTE
Use two outboard holes in horizontal support to install JCAD mounting
bracket; inboard hole is not used.
(4) Apply sealing compound ASTM D5363 to threads of two hexagon head capscrews
Kit 57K7628) on horizontal support with two hexagon head capscrews, four flat washers
57K7628), and two nuts J2295J995C2R06-PG5 (Figure 5, Kit 57K7628), as shown.
12529156
J2295J995C2R06-PG5
MS35338-46
AEW24X37N000GF3CQ1
AEW24X37N000GF3CQ1
HORIZONTAL
B1821BH038C300N
SUPPORT
JCAD002
Figure 5. JCAD Mounting Bracket Installation.
11