TM 9-2350-222-20-1-5
DRIVER'S HATCH NIGHT VIEWER LATCH REPLACEMENT (Sheet 2 of 6)
REMOVAL:
1.
Position driver's hatch in closed but not
latched position with night viewer latch in
latched position.
2.
Using cross-tip screwdriver, remove two
screws (A).
3.
Using 7/16 inch socket, remove three
washers away.
4.
Using flat-tip screwdriver, carefully pry up
around edges of cover (C). Remove dust
cover.
5.
Using flat-tip screwdriver, remove gasket
(D) and gaskets (E) from cover (C). Throw
gaskets away.
NOTE
Before performing step 6, get
another person to hold inside
components upon removal of
screws (F).
Using 3/4 inch socket, remove two screws
6.
ers away.
7.
Remove latch mechanism (H) and plate (J).
8.
Using flat-tip screwdriver, remove gasket
(K) and pad (L). Throw gasket and pad
away.
Go on to Sheet 3