DRIVER'S HATCH NIGHT VIEWER LATCH REPLACEMENT (Sheet 6 of 6)
Remove night viewer (TM 9-2350-222-10).
Using putty knife, apply sealant (Item 5,
(Q). Do not get sealant on gaskets.
Apply thread locking compound (Item 17,
Aline holes in cover (Q) with those of latch
(H) and with fingers, start two screws (R).
and three screws (P).
Using cross-tip screwdriver, tighten two
Using 7/16 inch socket, tighten three
With rag and dry cleaning solvent (Item
54, Appendix D), remove all excess adhe-
sive and sealant from area.
End of Task