TM 9-2350-222-20-1-5
DRIVER'S HATCH NIGHT VIEWER LATCH REPAIR (Sheet 1 of 10)
PROCEDURE INDEX
PAGE
PROCEDURE
Disassembly
Cleaning and Inspection
Assembly
Soft-jawed (padded) vise
7/16 in. combination box and
TOOLS:
3/32 in. alining pin
open end wrench
Hammer
3/16 in. drive punch
Long round nose pliers
1/8 in. drive punch
1/4 in. drill bit
Flat-tip screwdriver
Thickness gage
1/2 in. combination box and
open end wrench
Knife
1/2 in. socket with 1/2 in. drive
SUPPLIES:
Shims
Cotter pin
Teflon washer (12252050)
Lockwasher (MS35338-139)
PRELIMINARY PR0CEDURE
1.
Carefully press release lever and allow mechanism to unwind about one-half turn to latched position.
If faulty part is not within operating push rod parts, proceed to step 9 and remove parts as an
2.
3.