TM 9-2350-222-20-1-5
DRIVER'S HATCH DOOR ASSEMBLY AND SEALS (PASSIVE NIGHT VISION) REPAIR
(Sheet 5 of 5)
9.
Move handle (L) through its various
positions to check proper operation.
10. Move handle (L) to locked position and make
sure that door seal is seated all around and
that handle (L) is retained firmly in locked
position.
NOTE
If requirements of step 11 are
not met, shims (J) may be
They are approxi-
added.
mately 1/32 inch thick.
11. Drive pin (H) all the way into handle (L) and,
using retaining ring pliers, install rings (M)
into grooves of pin (H).
End of Task
16-122.4