HEADLIGHT BEAM SELECTOR SWITCH ASSEMBLY REPLACEMENT Sheet 1 of 1)
TOOLS: Cross-tip screwdriver
SUPPLIES: Lockwasher (MS35336-27) (2 required)
REFERENCE: TM 9-2350-222-10
Using wrench, disconnect electrical connector
Using screwdriver, remove two screws (B) and
Remove guard (D).
Pull selector switch (E) toward driver's seat.
Place selector switch (E) in position on mounting bracket (F).
Using wrench, connect electrical connector (A).
Place guard (D) on selector switch (E),
Using screwdriver, install two screws (B) and new lockwashers (C).
End of Task