DOMELIGHT RESISTOR ASSEMBLY BRACKET REPLACEMENT (Sheet 1 of 1)
TOOLS: 7/16 in. socket with 1/2 in. drive
extension with 1/2 in. drive
SUPPLIES: Lockwasher (MS35338-33) 2 required)
PRELIMINARY PROCEDURE: Remove resistor
Using socket, remove two screws (A),
Remove clamp (D) and bracket (E).
Position bracket holes and clamp (D) with holes
in domelight assembly (F).
Place new lockwasher (B) and washer (C) on
two screws (A).
Insert screws (A) through holes in positioned parts
of step 1.
Using socket, tighten screws (A).
End of Task