INFRARED POWER SUPPLY AND SHOCK MOUNT ASSEMBLY REPLACEMENT
(Sheet 2 of 5)
Using 1/2 inch socket, remove four screws (D), lockwashers (E), and lockwashers (F) securing
power supply (B) to mounting pad (G). Throw lockwashers (E) and (F) away.
Remove clamp (H).
Move power supply (B) from vehicle to bench.
Using 7/16 inch wrench to hold nut (J), use
7/16 inch socket and remove four screws (K)
and nuts (J) securing power supply (B) to
Remove ground strap (M), two washers (N),
four washers (P), washers (Q), and washers
(R) from bracket (L).
Go on to Sheet 3