TM 9-2350-222-20-1-4
INFRARED POWER SUPPLY AND SHOCK MOUNT ASSEMBLY REPLACEMENT
( S h e e t 5 of 5)
6.
Position assembled power supply (K) onto mounting pad (Q) inside turret.
7.. Install screw (R) through new washer (S),
ground strap (M), bracket (B), and new
washer (T). Using 1/2 inch socket, tighten
screw (R) into mounting pad (Q).
Install screw (R) through new washer (S),
8.
clamp (U), bracket (B), and new washer (T).
Using 1/2 inch socket, tighten screw (R) into
mounting pad (Q).
9.
Using same procedure as described in step 8,
except omitting clamp (U), install two screws
(T) and secure bracket (B) to mounting pad (Q).
10. Using 1 inch wrench, install connector on cable (V) to power supply (K).
11. Using 7/8 inch wrench, install connector on cable (W) to power supply (K).
12. Close turret platform access door (TM 9-2350-222-10).
TA139761
End of Task
10-206