TM 9-2350-222-20-1-4
BILGE PUMP RELAY ENCLOSURE ASSEMBLY REPAIR (Sheet 9 of 12)
Using 7/16 inch socket, remove screw (F))
3.
with two flat washers.
Using 7/16 inch socket. Remove nut (G) with
4.
lockwasher. Throw lockwasher away.
5.
Remove bus bar (H).
6.
Using 7/16 inch socket, remove nut (J) with
lockwasher. Throw lockwasher away.
7.
Remove lead 451 from terminal A2.
8.
Using 5/16 inch socket, remove nut (K) with
lockwasher and flat washer. Throw lockwasher
away.
9.
Remove ground lead (L) from terminal X2.
10.
Using 5/16 inch socket, remove nut (M) with
lockwasher and flat washer. Throw lockwasher
away.
11.
Remove lead 451 from terminal Xl.
12.
Using screwdriver, remove two screws (N) with
Go on to Sheet 3
TA139753
10-198