OIL FILLER TUBE AND HOSE (LOWER) REPLACEMENT (Sheet 2 of 2)
Push hose (A) over tube assembly (B).
Position clamp (C) over tube assembly (B) end of
Using socket, tighten nut of clamp (C).
Place clamp (D) loosely over hose (A) with
clamp nut facing you.
Place assembled parts (A) through (D) in
Push end of hose (A) over upper tube end (E).
Position new gasket (F) and tube assembly (B)
Insert three screws (H) in flange of tube
assembly (B) and tighten finger tight.
Using wrench, tighten screws (H).
Position clamp (D) on hose (A) over end of
upper tube end (E).
Using socket, tighten nut of clamp (D).
End of Task
All data on pages 6-49 and 6-50 deleted.