TM 9-2350-222-20- 1-3
POWERPLANT REPLACEMENT (2D ENGINE) (Sheet 13 of 23)
INSTALLATION:
WARNING
Fuel is very flammable and can explode
easily. To avoid serious injury or death,
keep fuel away from open fire and keep
fire extinguisher within easy reach when
working with fuel. Do not work on fuel
system when engine is hot. Fuel can be
i g n i t e d by hot engine.
W h e n working
with fuel, post signs that read `NO
S M O K I N G WITHIN 50 FEET OF VEHI-
CLE."
Remove final drive guide shields covering two final drive adapter assemblies.
1.
2.
Remove (page 12-9, step 1), clean, lubricate, and
install two final dri ve adapter assemblies (page
12-10, steps 4-7).
FINAL DRIVE
3.
Install final drive guide shield over two
final drive adapter assemblies.
ADAPTER ASSEMBLY
4.
Apply a light coat of grease to powerplant mounting surfaces.
5.
Make sure hoist hook is in powerplant
hole of engine and transmission sling.
NOTE
T-end of engine and transmission
sling should be toward front
(engine end of powerplant).
Go on to Sheet 14
Change 4
5-37
-