CYLINDER HEAD AND OIL PAN DRAIN TUBES (LEFT AND RIGHT) REPLACEMENT
Sheet 2 of 4)
Holding nut with wrench and using screwdriver, disconnect four fuel line clamps (C) from oil drain
Using screwdriver, loosen 16 clamps (D) on eight hoses (E) on each end of drain tube assembly.
Using pliers, cut lockwire on six capscrews (F).
Using 7/8 inch socket, remove six capscrews (F) and 12 washers (G).
Remove washers (G) and throw away.
Remove drain tube assembly (H) from engine.
Inspect capscrews for stripped threads.
Inspect hose clamps for general serviceability.
Replace defective parts as required.
Go on to Sheet 3