TM 9-2350-222-20-1-4
7.
Remove rags from filter assembly holes.
8.
Place new gasket (M) on transmission
and install filter assembly (F).
8.1.
Ensure 10 bolt holes (Ml) are clean
and free of oil.
9.
bolts (P) to hold filter assembly (F) to
transmission.
10.
Using a 9/16 inch socket wrench and
torque wrench, alternately tighten 10
bolts (P) to 26-32 lb-ft (35-43 N.m).
11.
Operate engine and transmission and check for
leaks at gasket.
12.
Install top deck (page 16-23).
13.
Install transmission shroud (page 9-23).
End of Task
Change 5 11-73