TRANSMISSION MAIN OIL FILTER ELEMENT REPLACEMENT (Sheet 2 of 7)
Using 1/4 inch x 20 NF x 3 inch long bolts
7/16 inch socket, loosen filter assembly by
installing bolts in holes (D) and tightening
evenly to withdraw filter assembly.
Using 7/16 inch socket, remove two 1/4 inch x
20 NF x 3 inch long bolts (D) from filters.
Lift filter assembly (C) slowly out of
transmission to reduce possibility of oil
entering bolt holes (E. 1). Remove and
throw gasket (E) away.
Some filters are secured with
nuts and do not
Using diagonal cutting pliers, remove lockwire
(F), if present, securing nuts on bottom of filter
assembly (C). Throw lockwire away.
Go on to Sheet 3
11-68 Change 5