TRANSMISSION SIDE OIL STRAINER ASSEMBLY REPAIR AND REPLACEMENT
(Sheet 4 of 8)
Using adjustable wrench, remove nut (K) and
nipple adapter (L) from transmission,
11. Remove vent tube (M) from transmission.
12. Using hose clamp pliers, remove both clamps
(A) and rubber tubing (B) from vent tube (M).
13. Slide nut (K) off opposite end of vent tube
Using diagonal pliers, cut lockwire (A) from six
Using 7/16 inch socket, remove six screws (B)
and washer seals (C) securing element cover (D)
to oil screen shell (E). Throw washer seals
Using putty knife, remove cover (D) and gasket
(F). Throw gasket away.
Remove preformed packing (G),
reinforcement (H), and element (J) from shell
(E). Separate reinforcement (H) from
element (J). Throw packing away.
Using 1/2 inch socket, remove two
jackscrews (K). `
CLEANING AND INSPECTION:
Using dry cleaning solvent (Item 54,
Appendix D) and rags, clean all parts.
Inspect all parts for defects.
Go on to Sheet 5
Replace parts found defective.