TRANSMISSION SIDE OIL STRAINER ASSEMBLY REPAIR AND REPLACEMENT (Sheet 3 of 8)
Using 1/2 inch socket, extension, and 1/2
inch wrench, remove six nuts and
Remove oil filler tube (C) from transmission"
Using putty knife, remove strainer (F) and
two gaskets (G) from mounting studs. Throw
Using two 5/16-18 jackscrews and 1/2 inch
socket, tighten jackscrews alternately and
remove side oil strainer assembly (H).
Using putty knife, remove gasket (J). Throw
Go on to Sheet 4