FILTER ELEMENT REPLACEMENT (Sheet 4 0f 7)
TRANSMISSION MAIN OIL
Dry cleaning solvent P-D-680 is toxic
and flammable. To avoid injury wear
protective goggles and gloves and use
in a well-ventilated area. Avoid
contact with skin, eyes, and clothes,
and do not breathe vapors. Do not
use near open fire or excessive heat.
The flash point for Type I dry
cleaning solvent is 100F (38C), and
for Type II is 140F (60C). If Y O U
b e c o m e dizzy while using dry
cleaning solvent, g e t fresh air
immediately and get medical aid. If
contact with eyes is made, wash your
eyes with water and get medical aid
CLEANING AND INSPECTION:
Clean filter elements (A) using dry
cleaning solvent. If filter elements
are damaged, throw them away.
Using putty knife, clean old gasket off filter
assembly head (B) mounting surface.
Clean dirt and oil off filter assembly head (B).
Inspect bypass valve springs for damage,
Replace if defective.
Stuff clean rags into filter assembly holes (C) on
Using putty knife, clean off gasket mounting
surface on transmission.
Ensure 10 bolt holes (D) are clean and
free of oil.
Go on to Sheet 5
11-70 change 5