TRANSMISSION SIDE OIL STRAINER ASSEMBLY REPAIR AND REPLACEMENT (Sheet 5 of 8)
Install element (A) with reinforcement (B) into shell (C).
Put new preformed packing (D) into groove of shell (C).
Position cover (E) with new gasket (F) to shell (C).
Install six new washer seals (G) and new screws (H) securing cover (E) to shell (C).
Using torque wrench with 7/16 inch socket, tighten six screws (H) to 20-25 lb-in (2-3 N.m).
Secure screws (H) in sets of three (or in pairs) with lockwire (J).
Go on to Sheet 6