TM 9-2350-222-34-1
ACCELERATOR CONTROL LINKAGE ASSEMBLY REPAIR (Sheet 4 of 13)
14. Pull washer (S) and preformed packing (T) from
riser housing (C). Discard preformed packing (T).
15. Using scribe, mark rod end clevis (U) and housing
(V) to provide a reference during assembly.
16. Using scribe, mark clevis with shaft (W) and
housing (V) to provide a reference during assembly.
17. Using 7/16 inch wrench, remove bolt (X) holding
tube assembly (Y) to rod end clevis (U).
18. Move tube assembly (Y) away from rod end clevis
(U).
19. Using 7/16 inch wrench, remove bolt (Z) holding
tube assembly (AA) to clevis with shaft (W).
20. Move tube assembly (AA) away from clevis with
shaft (W).
Go on to Sheet 5
TA130571
4-114
