TM 9-2350-222-34-1
ACCELERATOR CONTROL LINKAGE ASSEMBLY REPAIR (Sheet 2 of 13)
DISASSEMBLY:
1. Using inch wrench, remove four screws and
lockwashers (A) holding cover (B) to riser
housing (C).
2. Using pinch bar, pull away cover (B).
3. Pull away seal (D). Throw seal (D) away.
4. Using 7/16 inch wrench, remove bolt (E) holding
connecting link (F) to lever assembly (G).
5. Move connecting link (F) away from lever
assembly (G).
6. Using 1/2 inch wrench, remove seven screws
and lockwashers (H) holding riser housing (C) to
control housing assembly (J).
Go on to Sheet 3
TA130569
4-112
