TM 9-2350-222-20-2-3-2
LEVER INSTALLATION PROCEDURE
3.1.1-7
TOOLS:
Round nose pliers
1/16 in. drift pin punch
8 oz. ball peen hammer
Flat tip screwdriver
PERSONNEL: One
PROCEDURE
1.
Line up mounting hole in lever (1) with mounting hole in plate (2).
2.
Put lever mounting pin (3) through mounting holes in lever (1) and plate (2).
3.
Using punch and hammer, put spring pin (4) in plate (2) and lever mounting pin (3) (JPG).
4.
Thread nut (5) onto screw (6) until it bottoms.
5.
Using screwdriver install screw (6) with nut (5) in lever (l).
6.
Using pliers, attach spring (7) to lever (1) and plate (2).
NOTE
Follow-on Maintenance Action Required: Install slide Para 31.1-9
END OF TASK
Para 31.1-7
Change 1 31.1-9
