TM 9-2350-222-20-2-3-2
31.1-6
LEVER REMOVAL PROCEDURE
TOOLS:
Round nose pliers
1/16 in. drift pin punch
8 oz. ball peen hammer
Flat tip screwdriver
7/16 in. open end wrench
PERSONNEL One
`PRELIMINARY PROCEDURES:
Remove loader's safety switch assembly and guard Para 31.1-2
Remove slide Para 31.1-8
1.
Using pliers, remove spring (1) from lever (2) and plate (3).
2.
Using punch and hammer, remove spring pin (4) from plate (3) (JFG).
3.
Remove lever mounting pin (5) and lever (2) from plate (3).
4.
Using wrench and screwdriver remove screw (6) and nut (7) from lever (2).
END OF TASK
Para 31.1-6
31.1-8 Change 1
