TM 9-2350-222-20-2-3-2
31.1-5
SWITCH INSTALLATION PROCEDURE
Cross tip screwdriver (Phillips)
TOOLS:
11/32 in. box end wrench
PERSONNEL One
1.
Line up mounting holes in switch (1) with mounting holes in plate (2).
2.
Using screwdriver and wrench, attach switch (1) to plate (2) with two screws (3), two lockwashers (4),
and two nuts (5).
3.
Using screwdriver, attach two clamps (6) to plate (2) with two screws (7) and two lockwashers (8).
NOTE
Follow-on Maintenance Action Required:
Adjust switch (para 31.1- 10).
END OF TASK
Para 31.1-5
Change 1 31.1-7
