TM 9-2350-222-20-2-3-2
31.1-10. LOADER'S SAFETY SWITCH ADJUSTMENT PROCEDURE (CONT)
Procedure
1.
Using 7/16 inch wrench, loosen adjusting nut (1) on adjusting screw (2).
2.
Using screwdriver, turn adjusting screw (2) counterclockwise until screw (2) does not touch switch
plunger (3).
3.
Using screwdriver, turn switch adjusting screw (2) clockwise until switch (4) clicks. Turn adjusting
screw (2) clockwise one more turn after switch (4) clicks.
4.
Using screwdriver, hold adjusting screw (2). Using 7/16 in. wrench, lock adjusting nut (1) in place
against lever (6).
5.
Using wrench adapter crowfoot and torque wrench, torque adjusting nut (1) to between 60 and 98 inch
pounds (7 to 11 Newton meters).
Pull up on lever (5) and let go back to Safe position.
6.
END OF TASK
Para 31.1-10
31.1-14
Change 2
