TM 9-2350-222-20-2-3-2
31.1-2
LOADER'S SAFETY SWITCH ASSEMBLY AND GUARD REMOVAL PROCEDURE
3/4 in. socket (1/2 in. drive)
TOOLS:
1/2 in. drive ratchet
7/16 in. combination box and open end wrench
PERSONNEL: One
REFERENCE:
JPG for procedure to disconnect electrical connectors
EQUIPMENT LOCATION INFORMATION:
CALLOUT
FOLDOUT
EQUIPMENT
6
l65-mm Gun
11
Driver's Master Control Panel
Driver's master control panel MASTER BATTERY switch set to OFF
EQUIPMENT CONDITION:
1.
Disconnect three electrical connectors (1) (JPG).
Using wrench, remove screw (2), two lockwashers (3) securing ground lead (4) to gun mount (5).
2.
Using socket, remove three screws (6), three lockwashers (7) securing loader's guard (8), and loader's
3.
safety switch (9) to gun mount (5).
4.
Remove loader's guard (8) and loader's safety switch assembly (9) from gun mount (5).
END OF TASK
Para 31.1-2
Change 31.1-2
