TM 9-2350-222-20-1-5
SMOKE GENERATOR HULL WIRING HARNESS REPLACEMENT (Sheet 4 of 6)
INSTALLATION:
1.
Position and route wiring harness (A) along right side of hull.
NOTE
Traverse turret as necessary to gain access to retaining straps
and harness connectors.
2.
Connect smoke generator switch connector (B)
to fixing harness connector (C).
Position clamp (D) to harness, and position
3.
clamp and harness as shown.
4.
Using socket, install screw and washer (E).
TA140867
