TM 9-2350-222-20-1-5
4.
Open turret platform access door and
traverse turret to expose air cleaner blower
motor relay (G).
5.
Disconnect harness connectors (H) and (J).
6.
Using spanner wrench, disconnect connector
(K) from air cleaner blower motor relay (G).
7.
Using socket, remove screws and washers (L)
to release one end of straps (M).
8.
Using socket, remove screws and washers (N) to
release one end of straps (P).
9.
Disconnect connector (Q) from lead connector
(R).
10. Note routing and remove wiring harness from
hull.
Go on to Sheet 4
TA140866
23-14
