TM 9-2350-222-20-1-5
GAS PARTICULATE PRECLEANER-TO-FILTER HOSES REPLACEMENT (Sheet 2 of 2)
Using screwdriver, loosen two hoee clamps (F).
Pull hoses (B) from elbows (G) and remove hose
5.
clamps (F) from hoses.
6.
Remove two clamps (D) from hoses.
Remove two hoses (B) from vehicle.
7.
INSTALLATION:
Position replacement hoses from pre-
1.
cleaner to filters, placing around personnel
heater duct.
Place two hose clamps (A) onto hoses (B).
2.
Push hoses (B) onto filters (C).
3.
Using screwdriver, tighten hose clamps (A).
4.
Install two clamps (D) onto hoses (B), and
using socket, install screw and new lock-
washer (E) securing clamps (D) to hull.
Place two hose clamps (F) onto hoses (B).
5.
Push hoses (B) onto precleaned elbows (G).
Using screwdriver, tighten hose clamps (F)
6.
securing hoses to elbows.
TA253774
