TM 9-2350-222-20-1-5
ORIFICE ASSEMBLY AND HOSE REPLACEMENT (Sheet 3 of 3)
lNSTALLATION:
1.
Install breakaway socket (A) in hose (B).
Secure with hose clamp (C).
Connect free end of hose to heater. Secure with
2.
hose clamp (D).
3.
Using slip joint pliers, tighten hose clamps (C)
and (D) by squeezing tabs (E) and (F) on each
clamp.
Install replacement orifice assembly (G) in
4.
bracket (H) and secure using snap ring (J) and
retaining ring pliers.
5.
Connect breakaway socket (A) to orifice
assembly (G).
End of Task
TA139357