TM 9-2350-222-20-1-5
GAS PARTICULATE TUBES AND HOSES REPLACEMENT (Sheet 2 of 7)
REMOVAL:
NOTE
Only remove and install those components necessary to
replace the defective tube assembly or hose.
Using flat-tip screwdriver, loosen clamp (A)
1.
securing hose (B) to adapter (C).
Using flat-tip screwdriver, loosen clamp (D)
2.
securing hose (B) to tube (E).
3.
Remove hose (B) and clamps (A) and (D).
4.
Using flat-tip screwdriver, loosen clamps (F)
securing hoses (G) and (H) to tube (E).
5.
Remove tube (E).
Using flat-tip screwdriver, loosen champ (J)
securing hose (H) to adapter (K).
Some models may not have adap-
Remove hose (H) with clamps (F) and (J).
Go on to Sheet 3
TA253776
